Honeywell International Inc.- 专用继电器
专用继电器 - 型号列表
共 141 个型号| 制造商零件编号 | 库存 | 价格 | 交货时间 | 子类别 | 标准包装数量 | RoHS | 欧盟RoHS | UL档案号 | 机构认证与标准 | 重量（负载） | 电压 | 线圈类型 | 线圈功率 | 线圈电流 | 释放时间 | 电流比 | 额定功率 | 可见输出 | 额定电压 | 线圈电阻 | 推频（MHz/V） | 供电电压 | 开关电压 | 接触电阻 | Vgs(th)（最大）@ Id | 钳位电压 | 二极管配置 | 最大额定电流 | 最大开关负载 | 必须动作电压 | 基极电阻（R1） | 工作频率 | 最小输入电压 | 最小供电电压 | 平均正向功率 | 集电极-发射极饱和电压（最大）@ Vge, Ic | 触点额定电流 | 触点额定值 @ 电压 | 密封 | 深度 | 高度 | 重量 | 包装方式 | 触点形式 | 安装类型 | 端子类型 | 冷却的封装 | 触头材料 | 总长度 | 端接样式 | 触点数 | 典型触点布局 | 备注 | 类型 | 系列 | 继电器类型 | 应用细节 | 动作时间 | 湿度范围 | 机械寿命 | 抗冲击能力 | 工作温度 | 安装样式 | 接触件端接 | 产品特性 | 抗辐射加固 | 额定交流电压 | 直流反向电压（Vr）（最大） | 封装形式 | 位数 | 按下测试类型 | 线圈电压 | 高侧电压（自举）最大 | 电感量 | 测试电压 | 开关容量 | 开关电流 | 设计类型 | 长度 | 宽度 | 释放范围（时间） | 断态电压 | 触点形状 | 操作力 | 峰值脉冲功率 | 额定直流电流 | 交流开关电压 | 直流开关电压 | 峰值脉冲电流（8/20µs） | 尺寸/外形 | 绝缘材料 - 类型 | 功能 | 应用领域 | 工作寿命 | 最高温度限值 | 交流输入电压 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 General Purpose Relays DPDT; 24 Vdc Gen Purpose Relay Electromechanical Relay DPDT 10A 24VDC 650Ohm Socket Switches, Relays RELAY GEN PURPOSE DPDT 10A 24V Electromechanical Relay DPDT 10A 24VDC 650Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceUL, CE approved Relays SZR-LY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; DPDT; 24 Vdc Industrial relay 24 VDC 650 Ohm, SZR-LY2-1-DC24V, Honeywell Honeywell International Inc. | 29 | 1: ¥34.952 | 56 Days | Electromechanical Relay | 20 | RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 5 A | 110 % of the rated coil voltage | Standard | 900 mW | 10 A | 25ms | 36.9 mA | 240W|1.1kVA | No | 10 % min. | 650 Ohms | No | 24 VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 2.4 VDC | 19.2VDC | No | 10 A | 240 W | 80 % max. of the Rated Coil Voltage | 24 V, 10 A | 18,000 Operations/Hour | 2.4VDC | 80 % of the rated coil voltage | 0.9 W | 19.2 VDC | 10 A | 125 Vdc | Unsealed | 28 | 42.4 | 35 g [1.24 oz] | Bulk | DPDT | Socket | Solder/Plug-In | Dust Cover | Silver Cadmium Oxide | 21.5 | Solder Terminal | 8 | DPDT | Standard Relay; Solder/Plug-in; DPDT | Power Relay | SZR-LY | Non-Latching | Standard - No Indicator or Diode | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | Plug In | Solder Terminal | - | - | - | - | - | - | - | - | - | 650 | 1.8 | 1100 VA | 10 A@ 24 VDC | – | - | - | 25ms | 2.4 VDC | DPDT (2 Form C) | 25ms | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS PLUG-IN Electromechanical Relay DPDT 10A 24VDC 650Ohm Socket Switches, Relays RELAY GEN PURPOSE DPDT 10A 24V Electromechanical Relay DPDT 10A 24VDC 650Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains LED for output indicatorUL, CE approved RELAY,GP,PLUG-IN,SOLDER,DPDT,24VDC SZR-LY General Purpose Relay: LED Indicator; Plug-in/Solder Terminal; DPDT; 24 Vdc Honeywell 双刀双掷 插入式 非闭锁继电器, 10 A, 24V dc Honeywell International Inc. | 31 | 1: ¥81.736 | 56 Days | Electromechanical Relay | 20 | RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 5 A | 110 % of the rated coil voltage | 2 Poles | 900 mW | 36.9 mA | 25ms | 36.9 mA | 240W|1.1kVA | Yes | 10 % min. | 650 Ohms | No | 24 VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 2.4 VDC | 19.2VDC | No | 10 A | 240 W | 80 % max. of the Rated Coil Voltage | 24 V, 10 A | 18,000 Operations/Hour | 2.4VDC | 80 % of the rated coil voltage | 0.9 W | 19.2 VDC | 10 A | 125 Vdc | Unsealed | 36mm | 28mm | 35 g [1.24 oz] | Bulk | DPDT | Socket | Solder/Plug-In | Dust Cover | Silver Cadmium Oxide | 21.5 | Quick Connect | 8 | DPDT | LED Indicator; Solder/Plug-in; DPDT | Power Relay | SZR-LY | Non-Latching | LED Indicator | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | Through Hole | Quick Connect | LED Indicator | - | - | - | - | - | - | - | - | - | - | - | - | - | 21.5mm | - | - | - | - | - | 1.1 kVA | 240 W | 250V | 125V | 10 A | 21.5 x 36 x 28mm | 1.8kV ac | Y | 通用 | 100000000（机械）次操作，200000（电气）次操作 | +70°C | - |
 | 110 | 1: ¥63.24 | 56 Days | Not Specified | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay DPDT 10A 24VDC 650Ohm Socket Switches, Relays RELAY GEN PURPOSE DPDT 10A 24V Electromechanical Relay DPDT 10A 24VDC 650Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains LED for output indicatorContains a diode to absorb counter electromotive voltageUL, CE approved Relays SZR-LY General Purpose Relay: LED Indicator/Diode Protection; Plug-in/Solder Terminal; DPDT; 24 Vdc Honeywell International Inc. | 16 | 1: ¥94.112 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 5 A | 110 % of the rated coil voltage | 2 Poles | 900 mW | 40.9mA | 25ms | 36.9 mA | 240W|1.1kVA | Yes | 10 % min. | 650 Ohms | No | 24 VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 2.4 VDC | 19.2VDC | Yes | 10 A | 240 W | 80 % max. of the Rated Coil Voltage | 24 V, 10 A | 18,000 Operations/Hour | 2.4VDC | 80 % of the rated coil voltage | 0.9 W | 19.2 VDC | 10A | 125 Vdc | Unsealed | 28 | 42.4 | 35 g [1.24 oz] | Bulk | DPDT | Socket | Solder/Plug-In | Dust Cover | Silver Cadmium Oxide | 21.5 | Quick Connect | 8 | DPDT | LED Indicator/Diode Protection; Solder/Plug-in; DPDT | Power Relay | SZR-LY | Non-Latching | LED Indicator/Diode Protection | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | Through Hole | Quick Connect | Diode, LED Indicator | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay 4PDT 3A 220VAC 12.95KOhm Socket Switches, Relays RELAY GEN PURPOSE 4PDT 3A 220V Electromechanical Relay 4PDT 3A 220VAC 12.95KOhm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, four-pole type breaks 3 A loadGold-plated silver contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceUL, CE approved Relays SZR-MY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; 4PDT; 220 Vac Honeywell International Inc. | 20 | 1: ¥60.588 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 220 V, 1.5 A | 110 % of the rated coil voltage | Non Latching | 1.1 VA | 5.3mA | 20ms | 6.2 mA/6.8 mA | 72W|660VA | No | 30 % min. | 12.95 kOhms | No | 220VAC | 250VAC, 125VDC - Max | 50 mOhm max. | 66 VAC | 165VAC | No | 3 A | 660 VA | 80 % max. of the Rated Coil Voltage | 220 V, 3 A | 18,000 Operations/Hour | 66VAC | 80 % of the rated coil voltage | 0.9 W to 1.1 W | 165 VAC | 3A | 250 Vac | Unsealed | 28 | 36 | 35 g [1.24 oz] | Bulk | 4 Form C | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 | Solder Lug | 14 | 4PDT | Standard Relay; Solder/Plug-in; 4PDT | Power Relay | SZR-MY | Non-Latching | Standard - No Indicator or Diode | 20ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 75 °C [-13 °F to 167 °F] | Socket | Plug In | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay 4PDT 10A 24VDC 350Ohm Socket Switches, Relays RELAY GEN PURPOSE 4PDT 10A 24V Electromechanical Relay 4PDT 10A 24VDC 350Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, four-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains LED for output indicatorUL, CE approved Relays SZR-LY General Purpose Relay: LED Indicator; Plug-in/Solder Terminal; 4PDT; 24 Vdc Honeywell International Inc. | 218 | 1: ¥94.044 | 56 Days | Electromechanical Relay | 10 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 5 A | 110 % of the rated coil voltage | 4 Poles | 1.5 W | 73mA | 25ms | 69 mA | 240W|1.1kVA | Yes | 10 % min. | 350 Ohms | No | 24 VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 2.4 VDC | 19.2VDC | No | 10 A | 240 W | 80 % max. of the Rated Coil Voltage | 24 V, 10 A | 18,000 Operations/Hour | 2.4VDC | 80 % of the rated coil voltage | 0.9 W | 19.2 VDC | 10A | 125 Vdc | Unsealed | 28 | 42.4 | 35 g [1.24 oz] | Bulk | 4PDT | Socket | Solder/Plug-In | Dust Cover | Silver Cadmium Oxide | 41.5 | Quick Connect | 14 | 4PDT | LED Indicator; Solder/Plug-in; 4PDT | Power Relay | SZR-LY | Non-Latching | LED Indicator | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | Through Hole | Quick Connect | LED Indicator | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay 4PDT 3A 12VDC 160Ohm Socket Switches, Relays RELAY GEN PURPOSE 4PDT 3A 12V Electromechanical Relay 4PDT 3A 12VDC 160Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, four-pole type breaks 3 A loadGold-plated silver contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains LED for output indicatorUL, CE approved Relays SZR-MY General Purpose Relay: LED Indicator; Plug-in/Solder Terminal; 4PDT; 12 Vdc Industrial relay 12 VDC 160 Ohm, SZR-MY4-N1-DC12V, Honeywell Honeywell International Inc. | 20 | 1: ¥33.524 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 0.8 A | 110 % of the rated coil voltage | 4 Poles | 900 mW | 79mA | 20ms | 75 mA | 72W|660VA | Yes | 10 % min. | 160 Ohms | No | 12 VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 1.2 VDC | 9VDC | No | 3 A | 72 W | 80 % max. of the Rated Coil Voltage | 24 V, 3 A | 18,000 Operations/Hour | 1.2VDC | 80 % of the rated coil voltage | 0.9 W | 9 VDC | 3A | 125 Vdc | Unsealed | 28 | 36 | 35 g [1.24 oz] | Bulk | 4PDT | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 | Quick Connect | 14 | 4PDT | LED Indicator; Solder/Plug-in; 4PDT | Power Relay | SZR-MY | Non-Latching | LED Indicator | 20ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 75 °C [-13 °F to 167 °F] | Socket | Plug In | LED Indicator | - | - | - | - | - | - | - | - | 160 | 1.8 | 660 VA | 3 A@ 220 VAC | LED | - | - | 20ms | 1.2 VDC | 4PDT (4 Form C) | 20ms | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay 4PDT 3A 12VDC 160Ohm Socket Switches, Relays RELAY GEN PURPOSE 4PDT 3A 12V Electromechanical Relay 4PDT 3A 12VDC 160Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, four-pole type breaks 3 A loadGold-plated silver contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceUL, CE approved Relays SZR-MY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; 4PDT; 12 Vdc Honeywell International Inc. | 12 | 1: ¥54.264 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 0.8 A | 110 % of the rated coil voltage | 4 Poles | 900 mW | 75mA | 20ms | 75 mA | 72W|660VA | No | 10 % min. | 160 Ohms | No | 12 VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 1.2 VDC | 9VDC | No | 3 A | 72 W | 80 % max. of the Rated Coil Voltage | 24 V, 3 A | 18,000 Operations/Hour | 1.2VDC | 80 % of the rated coil voltage | 0.9 W | 9 VDC | 3A | 125 Vdc | Unsealed | 28 | 36 | 35 g [1.24 oz] | Bulk | 4PDT | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 | Quick Connect | 14 | 4PDT | Standard Relay; Solder/Plug-in; 4PDT | Power Relay | SZR-MY | Non-Latching | Standard - No Indicator or Diode | 20ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 75 °C [-13 °F to 167 °F] | Socket | Plug In | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay 4PDT 10A 24VDC 350Ohm Socket Switches, Relays RELAY GEN PURPOSE 4PDT 10A 24V Electromechanical Relay 4PDT 10A 24VDC 350Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, four-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains LED for output indicatorContains a diode to absorb counter electromotive voltageUL, CE approved Relays SZR-LY General Purpose Relay: LED Indicator/Diode Protection; Plug-in/Solder Terminal; 4PDT; 24 Vdc Honeywell International Inc. | 23 | 1: ¥66.368 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 5 A | 110 % of the rated coil voltage | Non Latching | 1.5 W | 73mA | 25ms | 69 mA | 240W|1.1kVA | Yes | 10 % min. | 350 Ohms | No | 24VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 2.4 VDC | 19.2VDC | Yes | 10 A | 240 W | 80 % max. of the Rated Coil Voltage | 24 V, 10 A | 18,000 Operations/Hour | 2.4VDC | 80 % of the rated coil voltage | 0.9 W | 19.2 VDC | 10A | 125 Vdc | Unsealed | 28 mm | 36 mm | 35 g [1.24 oz] | Bulk | 4 Form C | Socket | Solder/Plug-In | Dust Cover | Silver Cadmium Oxide | 41.5 mm | Solder Lug | 14 | 4PDT | LED Indicator/Diode Protection; Solder/Plug-in; 4PDT | Power Relay | SZR-LY | Non-Latching | LED Indicator/Diode Protection | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | Socket | - | Diode, LED Indicator | No | 250 V | 125 V | Dust Cover | 14 | No | 24V | 19.2VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay DPDT 5A 220VAC 12.95KOhm Socket Switches, Relays RELAY GEN PURPOSE DPDT 5A 220V Electromechanical Relay DPDT 5A 220VAC 12.95KOhm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 5 A loadFine Silver contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceUL, CE approved Relays SZR-MY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; DPDT; 220 Vac Honeywell International Inc. | 30 | 1: ¥22.78 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 220 V, 2 A | 110 % of the rated coil voltage | Non Latching | 1.1 VA | 5.3 mA, 4.6 mA | 20ms | 6.2 mA/6.8 mA | 120W|1.1kVA | No | 30 % min. | 12.9 kOhms | No | 220 VAC, 240 VAC | 250VAC, 125VDC - Max | 50 mOhm max. | 66 VAC | 165VAC | No | 5 A | 1100 VA | 80 % max. of the Rated Coil Voltage | 220 V, 5 A | 18,000 Operations/Hour | 66VAC | 80 % of the rated coil voltage | 1.1 W | 165 VAC | 5 A | 250 Vac | Unsealed | 28 mm | 28 mm | 35 g [1.24 oz] | Bulk | DPDT | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 mm | Solder Lug | 8 | DPDT | Standard Relay; Solder/Plug-in; DPDT | Power Relay | SZR-MY | Non-Latching | Standard - No Indicator or Diode | 20ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 75 °C [-13 °F to 167 °F] | Socket | Plug In | - | No | 250 V | 125 V | Dust Cover | 8 | No | - | - | - | - | - | - | - | 36 mm | 21.5 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220V |
 General Purpose Relays RELAYS Electromechanical Relay DPDT 5A 12VDC 160Ohm Socket Switches, Relays RELAY GEN PURPOSE DPDT 5A 12V Electromechanical Relay DPDT 5A 12VDC 160Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 5 A loadFine Silver contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceUL, CE approved Relays SZR-MY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; DPDT; 12 Vdc Honeywell International Inc. | 64 | 1: ¥25.84 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 2 A | 110 % of the rated coil voltage | Non Latching | 900 mW | 75mA | 20ms | 75 mA | 120W|1.1kVA | No | 10 % min. | 160 Ohms | No | 12VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 1.2 VDC | 9VDC | No | 5 A | 120 W | 80 % max. of the Rated Coil Voltage | 24 V, 5 A | 18,000 Operations/Hour | 1.2VDC | 80 % of the rated coil voltage | 0.9 W | 9 VDC | 5A | 125 Vdc | Unsealed | 28 | 36 | 35 g [1.24 oz] | Bulk | 2 Form C | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 | Solder Lug | 8 | DPDT | Standard Relay; Solder/Plug-in; DPDT | Power Relay | SZR-MY | Non-Latching | Standard - No Indicator or Diode | 20ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 75 °C [-13 °F to 167 °F] | Socket | Plug In | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay 4PDT 10A 220VAC 6.7KOhm Socket Switches, Relays RELAY GEN PURPOSE 4PDT 10A 220V Electromechanical Relay 4PDT 10A 220VAC 6.7KOhm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, four-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceUL, CE approved Relays SZR-LY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; 4PDT; 220 Vac Industrial relay 220 VAC 6700 Ohm, SZR-LY4-1-AC220V, Honeywell Honeywell International Inc. | 42 | 1: ¥18.02 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 110 V, 7.5 A | 110 % of the rated coil voltage | Non Latching | 2.5 VA | 9.8mA | 25ms | 11.5 mA/13.1 mA | 240W|1.1kVA | No | 30 % min. | 6.7 kOhms | No | 220VAC | 250VAC, 125VDC - Max | 50 mOhm max. | 66 VAC | 176VAC | No | 10 A | 1100 VA | 80 % max. of the Rated Coil Voltage | 110 V, 10 A | 18,000 Operations/Hour | 66VAC | 80 % of the rated coil voltage | 1.95 W to 2.5 W | 176 VAC | 10A | 250 Vac | Unsealed | 28 | 42.4 | 35 g [1.24 oz] | Bulk | 4 Form C | Socket | Solder/Plug-In | Dust Cover | Silver Cadmium Oxide | 41.5 | Solder Lug | 14 | 4PDT | Standard Relay; Solder/Plug-in; 4PDT | Power Relay | SZR-LY | Non-Latching | Standard - No Indicator or Diode | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | - | - | - | - | - | - | - | - | - | - | - | 6700 | 1.8 | 1100 VA | 10 A@ 24 VDC | – | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay 4PDT 3A 24VDC 650Ohm Through Hole Switches, Relays RELAY GEN PURPOSE 4PDT 3A 24V Electromechanical Relay 4PDT 3A 24VDC 650Ohm Through Hole Product Highlights:A wide range of applications from power to sequence controlDesigned small, four-pole type breaks 3 A loadGold-plated silver contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceUL, CE approved Relays SZR-MY General Purpose Relay: Standard Relay; PCB Terminal; 4PDT; 24 Vdc Honeywell International Inc. | 60 | 1: ¥51.204 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 0.8 A | 110 % of the rated coil voltage | Non Latching | 900 mW | 36.9mA | 20ms | 36.9 mA | 72W|660VA | No | 10 % min. | 650 Ohms | No | 24VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 2.4 VDC | 19.2VDC | No | 3 A | 72 W | 80 % max. of the Rated Coil Voltage | 24 V, 3 A | 18,000 Operations/Hour | 2.4VDC | 80 % of the rated coil voltage | 0.9 W | 18 VDC | 3A | 125 Vdc | Unsealed | 28 mm | 36 mm | 35 g [1.24 oz] | Bulk | 4 Form C | Through Hole | PCB | Dust Cover | Silver | 21.5 mm | PC Pin | 14 | 4PDT | Standard Relay; PCB; 4PDT | Power Relay | SZR-MY | Non-Latching | Standard - No Indicator or Diode | 20ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 75 °C [-13 °F to 167 °F] | Socket | Plug In | - | No | 250 V | 125 V | Dust Cover | 14 | No | 24V | 19.2VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay DPDT 10A 12VDC 160Ohm Socket Switches, Relays RELAY GEN PURPOSE DPDT 10A 12V Electromechanical Relay DPDT 10A 12VDC 160Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains LED for output indicatorUL, CE approved Relays SZR-LY General Purpose Relay: LED Indicator; Plug-in/Solder Terminal; DPDT; 12 Vdc Honeywell International Inc. | 36 | 1: ¥80.376 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 5 A | 110 % of the rated coil voltage | Non Latching | 900 mW | 79mA | 25ms | 75 mA | 240W|1.1kVA | Yes | 10 % min. | 160 Ohms | No | 12VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 1.2 VDC | 9.6VAC | No | 10 A | 240 W | 80 % max. of the Rated Coil Voltage | 24 V, 10 A | 18,000 Operations/Hour | 1.2VAC | 80 % of the rated coil voltage | 0.9 W | 9.6 VDC | 10A | 125 Vdc | Unsealed | 28 | 42.4 | 35 g [1.24 oz] | Bulk | 2 Form C | Socket | Solder/Plug-In | Dust Cover | Silver Cadmium Oxide | 21.5 | Solder Lug | 8 | DPDT | LED Indicator; Solder/Plug-in; DPDT | Power Relay | SZR-LY | Non-Latching | LED Indicator | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | - | - | LED Indicator | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay DPDT 5A 24VDC 650Ohm Socket Switches, Relays RELAY GEN PURPOSE DPDT 5A 24V Electromechanical Relay DPDT 5A 24VDC 650Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 5 A loadFine Silver contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains LED for output indicatorContains a diode to absorb counter electromotive voltageUL, CE approved Relays SZR-MY General Purpose Relay: LED Indicator/Diode Protection; Plug-in/Solder Terminal; DPDT; 24 Vdc Honeywell International Inc. | 20 | 1: ¥80.172 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 2 A | 110 % of the rated coil voltage | 2 Poles | 900 mW | 40.9mA | 20ms | 36.9 mA | 120W|1.1kVA | Yes | 10 % min. | 650 Ohms | No | 24 VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 2.4 VDC | 19.2VDC | Yes | 5 A | 120 W | 80 % max. of the Rated Coil Voltage | 24 V, 5 A | 18,000 Operations/Hour | 2.4VDC | 80 % of the rated coil voltage | 0.9 W | 18 VDC | 5A | 125 Vdc | Unsealed | 28 mm | 36 mm | 35 g [1.24 oz] | Bulk | DPDT | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 mm | Quick Connect | 8 | DPDT | LED Indicator/Diode Protection; Solder/Plug-in; DPDT | Power Relay | SZR-MY | Non-Latching | LED Indicator/Diode Protection | 20ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 75 °C [-13 °F to 167 °F] | Socket | Plug In | Diode, LED Indicator | No | 250 V | 125 V | Dust Cover | 8 | No | 24V | 19.2VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay DPDT 5A 24VDC 650Ohm Socket Switches, Relays RELAY GEN PURPOSE DPDT 5A 24V Electromechanical Relay DPDT 5A 24VDC 650Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 5 A loadFine Silver contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains a diode to absorb counter electromotive voltageUL, CE approved Relays SZR-MY General Purpose Relay: Diode Protection; Plug-in/Solder Terminal; DPDT; 24 Vdc Honeywell International Inc. | 40 | 1: ¥74.324 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 2 A | 110 % of the rated coil voltage | Non Latching | 900 mW | 36.9mA | 20ms | 36.9 mA | 120W|1.1kVA | No | 10 % min. | 650 Ohms | No | 24VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 2.4 VDC | 19.2VDC | Yes | 5 A | 120 W | 80 % max. of the Rated Coil Voltage | 24 V, 5 A | 18,000 Operations/Hour | 2.4VDC | 80 % of the rated coil voltage | 0.9 W | 18 VDC | 5A | 125 Vdc | Unsealed | 28 mm | 36 mm | 35 g [1.24 oz] | Bulk | 2 Form C | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 mm | Solder Lug | 8 | DPDT | Diode Protection; Solder/Plug-in; DPDT | Power Relay | SZR-MY | Non-Latching | Diode Protection | 20ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 75 °C [-13 °F to 167 °F] | Socket | Plug In | Diode | No | 250 V | 125 V | Dust Cover | 8 | No | 24V | 19.2VDC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay 4PDT 10A 12VDC 100Ohm Socket Switches, Relays RELAY GEN PURPOSE 4PDT 10A 12V Electromechanical Relay 4PDT 10A 12VDC 100Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, four-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains LED for output indicatorUL, CE approved Relays SZR-LY General Purpose Relay: LED Indicator; Plug-in/Solder Terminal; 4PDT; 12 Vdc Honeywell International Inc. | 82 | 1: ¥59.636 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 5 A | 110 % of the rated coil voltage | Non Latching | 1.5 W | 124mA | 25ms | 120 mA | 240W|1.1kVA | Yes | 10 % min. | 100 Ohms | No | 12VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 1.2 VDC | 9.6VAC | No | 10 A | 240 W | 80 % max. of the Rated Coil Voltage | 24 V, 10 A | 18,000 Operations/Hour | 1.2VAC | 80 % of the rated coil voltage | 0.9 W | 9.6 VDC | 10A | 125 Vdc | Unsealed | 28 mm | 36 mm | 35 g [1.24 oz] | Bulk | 4 Form C | Socket | Solder/Plug-In | Dust Cover | Silver Cadmium Oxide | 41.5 mm | Solder Lug | 14 | 4PDT | LED Indicator; Solder/Plug-in; 4PDT | Power Relay | SZR-LY | Non-Latching | LED Indicator | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | Socket | - | LED Indicator | No | 250 V | 125 V | Dust Cover | 14 | No | 12V | 9.6VAC | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay DPDT 10A 12VDC 160Ohm Socket Switches, Relays RELAY GEN PURPOSE DPDT 10A 12V Electromechanical Relay DPDT 10A 12VDC 160Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceUL, CE approved Relays SZR-LY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; DPDT; 12 Vdc Industrial relay 12 VDC 160 Ohm, SZR-LY2-1-DC12V, Honeywell Honeywell International Inc. | 180 | 1: ¥34.952 | 56 Days | Electromechanical Relay | 20 | RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 5 A | 110 % of the rated coil voltage | Non-Latching | 900 mW | 75 mA | 25ms | 75 mA | 240W|1.1kVA | No | 10 % min. | 160 Ohms | No | 12 VDC | 250 VAC, 125 VDC | 50 mOhm max. | 1.2 VDC | 9.6VAC | No | 10 A | 240 W | 80 % max. of the Rated Coil Voltage | 24 V, 10 A | 18,000 Operations/Hour | 1.2VAC | 80 % of the rated coil voltage | 0.9 W | 9.6 VDC | 10 A | 125 Vdc | Unsealed | 28 | 36 mm | 35 g [1.24 oz] | Bulk | DPDT | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 | Solder Lug | 8 | DPDT | Standard Relay; Solder/Plug-in; DPDT | General Purpose Relays | SZR-LY | Non-Latching | Standard - No Indicator or Diode | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | Socket | Plug In | - | - | - | - | - | - | - | - | - | 160 | 1.8 | 1100 VA | 10 A@ 24 VDC | – | 28 mm | 21.5 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay DPDT 10A 220VAC 12.95KOhm Socket Switches, Relays RELAY GEN PURPOSE DPDT 10A 220V Electromechanical Relay DPDT 10A 220VAC 12.95KOhm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 10 A loadSilver Cadium Oxide contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceContains LED for output indicatorUL, CE approved Relay;SZR-LYseries;LEDIndicator;Plug-in/SolderLugs;DPDT;220VAC SZR-LY General Purpose Relay: LED Indicator; Plug-in/Solder Terminal; DPDT; 220 Vac Honeywell International Inc. | 14 | 1: ¥83.776 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 110 V, 7.5 A | 110 % of the rated coil voltage | Non Latching | 1.1 VA | 5.3 mA, 4.6 mA | 25ms | 6.2 mA/6.8 mA | 240W|1.1kVA | Yes | 30 % min. | 12.9 kOhms | No | 220 VAC, 240 VAC | 250VAC, 125VDC - Max | 50 mOhm max. | 66 VAC | 176VAC | No | 10 A | 1100 VA | 80 % max. of the Rated Coil Voltage | 110 V, 10 A | 18,000 Operations/Hour | 66VAC | 80 % of the rated coil voltage | 1.1 W | 176 VAC | 5 A | 250 Vac | Unsealed | 28 | 28 mm | 35 g [1.24 oz] | Bulk | DPDT | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 | Solder Lug | 8 | DPDT | LED Indicator; Solder/Plug-in; DPDT | Power Relay | SZR-LY | Non-Latching | LED Indicator | 25ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 70 °C [-13 °F to 158 °F] | Plug In, Solder | - | LED Indicator | - | - | - | - | - | - | - | - | - | - | - | - | - | 36 mm | 21.5 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 General Purpose Relays RELAYS Electromechanical Relay DPDT 5A 24VDC 650Ohm Socket Switches, Relays RELAY GEN PURPOSE DPDT 5A 24V Electromechanical Relay DPDT 5A 24VDC 650Ohm Socket Product Highlights:A wide range of applications from power to sequence controlDesigned small, two-pole type breaks 5 A loadFine Silver contactHigh dielectric strength (1,800 Vac)High reliability and long lifeUltra-high sensitivity with quick response timeHigh vibration and shock resistanceUL, CE approved Relays SZR-MY General Purpose Relay: Standard Relay; Plug-in/Solder Terminal; DPDT; 24 Vdc Honeywell International Inc. | 10 | 1: ¥48.076 | 56 Days | Electromechanical Relay | 20 | Lead free / RoHS Compliant | Compliant | E#150950 | UL, CE | 24 V, 2 A | 110 % of the rated coil voltage | 2 Poles | 900 mW | 36.9mA | 20ms | 36.9 mA | 120W|1.1kVA | No | 10 % min. | 650 Ohms | No | 24 VDC | 250VAC, 125VDC - Max | 50 mOhm max. | 2.4 VDC | 19.2VDC | No | 5 A | 120 W | 80 % max. of the Rated Coil Voltage | 24 V, 5 A | 18,000 Operations/Hour | 2.4VDC | 80 % of the rated coil voltage | 0.9 W | 18 VDC | 5A | 125 Vdc | Unsealed | 28 | 36 | 35 g [1.24 oz] | Bulk | DPDT | Socket | Solder/Plug-In | Dust Cover | Silver | 21.5 | Quick Connect | 8 | DPDT | Standard Relay; Solder/Plug-in; DPDT | Power Relay | SZR-MY | Non-Latching | Standard - No Indicator or Diode | 20ms | 45 % RH to 85 % RH | 10 Hz to 55 Hz at Double Amplitude of 1.0 mm | 1000 m/s2 (Approx. 100 G) | -25 °C to 75 °C [-13 °F to 167 °F] | Socket | Plug In | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |