点击放大查看
ATS22C48Q
| 制造商 | Schneider Electric SE |
| 描述 | Softstarter ATS22 480A 400V 施耐德(SCHNEIDER) 软启动柜 Schneider Electric component ATS22C48Q: soft starter-ATS22-control 220V-power 230V(132kW)/400...440V(250kW) Schneider Electric ATS22 系列 480 A 软启动器, IP00, 250 kW, 230 → 440 V |
| 分类 |
合规参数
| 标准 | EN/IEC 60947-4-2 | 合规性 | Conducted and radiated emissions conforming to IEC 60947-4-2 level ADamped oscillating waves conforming to IEC 61000-4-12 level 3Electrostatic discharge conforming to IEC 61000-4-2 level 3Immunity to electrical transients conforming to IEC 61000-4-4 level 4Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3 level 3Voltage/current impulse conforming to IEC 61000-4-5 level 3 |
| 防护类型 | Phase failure on lineThermal protection on motorThermal protection on starter | 认证 | CCCCSAC-TickGOSTUL |
电气参数
| 输入端 | 750 Ohm | 噪声 | 56 dB |
| 输出端 | (R1)relay outputs 230 V running, alarm, trip, stopped, not stopped, starting, ready, C/O(R2)relay outputs 230 V running, alarm, trip, stopped, not stopped, starting, ready, C/O | 电路 | 20 W |
| 数据速率 | 4800, 9600 or 19200 bps | 频率 | 45...66 Hz |
| 接口 | RS485 multidrop | 额定功率 | 250 kW |
| 额定输出功率 | 132 kW at 230 V250 kW at 400 V250 kW at 440 V | 额定电压 | 440 V |
| 输出电流 | 0.4...1 Icl adjustable | 供电电压 | 230 → 440 V |
| 感应电流 | 437 A | 输出数量 | 2 |
| 开关电流 | Relay outputs 100 mA at 12 V, DC | 最大额定电流 | 480 A |
| 输出1频率 | 3 | 最小输入电压 | 24 V (<= 30 V) |
| 最大功耗 | 218 W for standard applications | 典型相位噪声 (dBc/Hz) | 3 |
| 集电极-发射极击穿电压（最大） | 220 → 230 V | ||
机械参数
| 深度 | 339.7 mm | 宽度 | 304 mm |
| 高度 | 455 mm | 重量 | 50 kg |
| 启动方式 | Start with torque control (current limited to 3.5 In) | 连接器类型 | 1 RJ45 |
| 安装样式 | With heat sink | 总深度 | 455mm |
| 总宽度 | 304mm | 总长度 | 339.7mm |
| 位数 | 3 phases | 供应商器件封装 | ATS22 |
产品信息
| 用途 | AC-53A | 系列 | ATS22 |
| 功能 | Internal bypass | 协议 | Modbus |
| 标签类型 | CE | CAD图纸 | 3D CAD Model |
| 产品子类型 | Soft starter | 总线连接 | In the motor supply lineTo the motor delta terminals |
| 通信接口 | Serial | 测量范围 | Altistart 22 |
| 工作高度 | Vertical +/- 10 degree | 控制/显示类型 | 220 → 230 V |
| 其他规格 | (LI1, LI2, LI3)logic 5 mA 4.3 kOhm | 应用细节 | Severe and standard applications |
| RAM容量/已安装 | 31 | 输入数量及类型 | 3 |
| 适用产品/相关产品 | Asynchronous motors | ||
环境参数
| 密封等级 | IP00 | 冷却类型 | Forced convection |
| 湿度范围 | <= 95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 | 抗冲击能力 | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| 存储接口 | -25...70 °C | 防护等级 | Level 2 conforming to IEC 60664-1 |
| 工作压力 | <= 1000 m without derating> 1000...< 2000 m with current derating of 2.2 % per additional 100 m | 抗振性 | 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-61.5 mm (f = 2...13 Hz) conforming to EN/IEC 60068-2-6 |
| 工作温度 | +40°C | ||