TDK Electronics AG- 固定电感器
固定电感器 - 型号列表
共 5,735 个型号| 制造商零件编号 | 库存 | 价格 | RoHS | 电感量 | 容差 | 最大额定电流 | 初始电阻（最小） | 封装形式 | 包装方式 | 尺寸/外形 | 端接样式 | 工厂包装数量 | 磁芯材料 | 测试频率 | 屏蔽 | 零件号别名 | 标准包装数量 | 直流电阻（DCR） | 直径 | 安装类型 | 总长度 | 类型 | 产品 | 电感量范围 | 自谐振频率 | 系列 | 宽度 | 产品类别 | 欧盟RoHS | SVHC | 海关税号 | 重量 | 引脚样式 | 工作温度 | 核心类型 | 量程（°/s） | 直流电阻（DCR）（最大） | 技术 | 其他名称 | 长度 | 磁芯材质 | Qmax @ Th | 额定直流电流 | 高度 | 总体尺寸 | 引脚数 | 品质因数 @ 频率 | 额定电压 | 电感测试频率 | 外径 | 抗辐射加固 | 军用标准 | 阻抗 | 直流正向电流（If）（最大） | 深度 | 失效率 | 电流 | 滤波器类型 | 高度（最大） | 线路数量 | 引脚直径 | 供应商器件封装 | 认证机构 | 电阻公差 | 饱和电流（Isat） | 通态电流（It (RMS)）（最大） | 电阻 | 引脚间距 | 柱间距 | 引线长度 | 单元数量 | 值范围 | 包含封装 | 值 | 套件类型 | 套件内容 | 击穿电压 | 已删除 | 配置 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | 10 | 1700: ¥2.6316 | RoHS Compliant | 1 uH | - | - | - | - | Reel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Fixed Inductors | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Inductor Kits & Accessories Design Kit Power Inductors 10x10mm Sample Kits For SMT Inductors SAMPLEKITFORSMT-POWERINDUCTOR10x10mm EPCOS | 10 | 1: ¥1,912.35 | RoHS Compliant | - | - | - | - | - | Bulk | - | - | 1 | - | - | - | - | - | - | - | - | - | - | SMD Inductor Kits | 1 uH to 1000 uH | - | - | - | Inductor Kits & Accessories | Compliant | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Fixed Inductors 30uH 1.5A 0.3ohms VHF Choke Wirewound 30uH 20% 100KHz Carbonyl Iron 1.5A 300mOhm DCR AXL T/R VHF-CHOKE 30UH 1.5 A INDUCTOR, 30UH, 20%, 1.5A, 44MHZ VHF-CHOKE30uH1.5A EPCOS | 1400 | 1: ¥13.056 | RoHS Compliant | 30 uH | 20 % | 1.5 A | 0.3 Ohms | 30 mm | Bulk | 7.5 mm Dia. x 30 mm L | Axial | 1000 | Carbonyl Iron | 100 MHz | Unshielded | B82134A5152M000 | 1,000 | 300 mOhm | 7.5 mm | Through Hole | 31.4 | VHF Chokes, Inductors | - | :± 20% | 44 MHz | B82134 | - | Fixed Inductors | Compliant | :No SVHC (20-Jun-2013) | 85045020 | 0.003 | Axial | - 55 C to + 125 C | :Inductor | :EPCOS - B82134 Series VHF Chokes | :0.3ohm | Wirewound | 495-5608-1 | :24mm | Iron | - | :1.5A | :24mm | :7.5mm x 30mm | - | - | :500V | :0.1MHz | :7.5mm | - | - | - | - | - | - | - | - | - | - | - | - | :VDE 565-2 | :1.5% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 4750 | 1: ¥7.208 | RoHS Compliant | 18 uH | 10 % | 550 mA | 0.6 Ohms | 1812 (4532 metric) | Reel | 3.2 mm W x 4.5 mm L x 3.2 mm H | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 18 MHz | - | 3.2 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Fixed Inductors 2-FACH-NETZCHOKE 2X1.1MH 2.0A RING CORE CHOKE 2X1.1MH 2A Common Mode Chokes Dual 1.1mH 10kHz 2A 65mOhm DCR SMD Blister T/R RINGCORECHOKE2x1.1mH2A EPCOS | 441 | 1: ¥19.176 | RoHS Compliant | 6 uH | - 30 %, + 50 % | 2 A | 65 mOhms | 8 mm | Tray | 13.3 mm W x 14.5 mm L x 8 mm H | SMD/SMT | 250 | Ferrite | 0.01 MHz | - | B82720S2202N040 | 250 | 65 mOhm | Not Required mm | Surface Mount | 13.3 mm | Power Line Chokes | Chokes | - | - | B82720S | 13.3 mm | - | - | - | - | - | - | - 25 C to + 40 C | - | - | - | - | 495-5723-1 | - | - | - | - | 10.7 mm | - | - | - | - | - | - | No | Not Required | Not Required ohm | 2000 mA | 16.6 mm | Not Required | 2A | Power Line | 0.421" (10.70mm) | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 10 | 1: ¥10.744 | RoHS Compliant | 68 uH | 10 % | 0.9 A | 0.28 Ohms | 8.3 mm x 7.5 mm x 5.5 mm | :Cut Tape | 7.5 mm W x 8.3 mm L x 5.5 mm H | SMD/SMT | - | - | - | Unshielded | - | - | - | - | - | - | - | SMD Power Inductors | :± 10% | - | B82473A1 | 7.5 mm | - | - | :No SVHC (20-Jun-2013) | 85045020 | 0.001 | - | - | :Wirewound | :EPCOS - B82473A1 Series | :0.28ohm | - | - | - | - | - | - | - | :8.3mm x 7.5mm x 5.5mm | :2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | :900mA | :850mA | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Fixed Inductors VHF-CHOKE 13 UH 3 A VHF Choke Wirewound 13uH 20% 100KHz Ferrite 3A 24mOhm DCR AXL Bulk VHF-CHOKE 13UH 3 A VHF-CHOKE13uH3A EPCOS | 423 | 1: ¥11.968 | RoHS Compliant | 13 uH | 10 % | 3 A | 0.024 Ohms | 29 mm | Bulk | 6.5 mm Dia. x 29 mm L | Axial | 200 | Ferrite | 100K | Unshielded | B82111B0000C019 | 1 | 24 mOhm | 6.5 mm | Through Hole | 29 | VHF Choke | - | - | 170 MHz | B82111B | - | - | Compliant | - | - | - | Axial | - 55 C to + 125 C | - | - | - | Wirewound | - | - | Ferrite | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Fixed Inductors 10uH 3.0A 0.077ohms VHF Choke Wirewound 10uH 20% 1MHz Carbonyl Iron 3A 77mOhm DCR AXL T/R VHF-CHOKE 10UH 3 A INDUCTOR, 10UH, 20%, 3A, 69MHZ VHF-CHOKE10uH3A EPCOS | 2000 | 1000: ¥4.2635 | RoHS Compliant | 10 uH | 20 % | 3 A | 0.077 Ohms | Axial | Bulk | 0.295" Dia x 0.984" L (7.50mm x 25.00mm) | Axial | 1000 | Carbonyl Iron | 1M | Unshielded | B82133A5302M000 | 1,000 | 77 mOhm | 7.5 | Through Hole | 26.4 | VHF Choke | - | :± 20% | 69 MHz | - | - | Fixed Inductors | Compliant | :No SVHC (20-Jun-2013) | 85045020 | 0.003 | Axial | -55°C ~ 125°C | :Choke | :EPCOS - B82133 Series | :0.077ohm | Wirewound | 495-5606-1 | :24mm | Iron | - | :3A | :24mm | :7.5mm x 25mm | - | - | :500V | :1MHz | :7.5mm | - | - | - | - | - | - | - | - | - | - | - | - | :VDE 565-2 | :3% | - | - | 77mΩ | - | - | - | - | - | - | - | - | - | - | - | - |
 Fixed Inductors 1mH 2A 30% 18.2x13.2mm Epcos 1mH ±30% Ferrite, 2A Idc, 80mΩ Rdc Common Mode Chokes Dual 1mH 100kHz 2A 80mOhm DCR Thru-Hole Box CHOKE, RING CORE, DOUBLE, 1MH, 2A EPCOS B82721A 系列 1 mH ±30% 铁氧体 功率电感器, 2A Idc, 80mΩ Rdc EPCOS | 66 | 1: ¥12.9675 | RoHS Compliant | 1 mH | 30 % | 2 A | 80 mOhms | 20.3 mm | Tray | 13.2 mm W x 18.2 mm L x 20.3 mm H | Radial | 720 | Ferrite | 0.1 MHz | - | - | - | - | Not Required mm | - | 18.2 mm | Power Line Choke | Chokes | :± 30% | - | - | 13.2 mm | - | - | :No SVHC (20-Jun-2013) | 85045095 | 0.026 | Pin | - 40 C to + 125 C | :Power Line Choke | :EPCOS - B82721K Series | :0.08ohm | - | - | 18.2mm | - | - | :2A | 20.3mm | - | :4 | - | - | - | - | No | Not Required | Not Required ohm | 2000 mA | 13.2mm | Not Required | - | - | - | - | 0.7mm | - | - | - | - | - | - | 15 mm | 10 mm, 15 mm | - | - | - | - | - | - | - | - | - | - |
 | 124 | 1: ¥9.452 | RoHS Compliant | 3.3 uH | 20 % | 2.5 A | 0.023 Ohms | 7.3 mm x 7.3 mm x 4.5 mm | - | 7.3 mm W x 7.3 mm L x 4.5 mm H | SMD/SMT | - | - | - | Shielded | - | - | - | - | - | - | - | SMD Power Inductors | - | - | B82472G6 | 7.3 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Fixed Inductors 1.0uH 1200mA .16ohms Ind RF Choke Bobbin Core 1uH 10% 1MHz 55Q-Factor Ferrite 1.2A AXL T/R CHOKE RF 1.0UH 1.2A AXIAL Epcos 1μH ±10% Ferrite Leaded Inductor, Max SRF:205MHz, Q:55, 1.2A Idc, 160mΩ Rdc INDUCTOR, 1UH, 10%, 1200MA, 205MHZ INDUCTOR,B78108-S1102-K Inductor: axial; 1uH; 1.2A; 160mΩ; THT EPCOS | 35000 | 5000: ¥0.7276 | RoHS Compliant | 1 uH | 10 % | 1200 mA | 0.16 Ohms | Axial | Reel | 0.157" Dia x 0.362" L (4.00mm x 9.20mm) | Axial | 5000 | Ferrite | 7.96MHz | Unshielded | B78108S1102K000 | 5,000 | 160 mOhm Max | 4mm | Through Hole | 11.5 | RF Choke | - | :± 10% | 205 MHz | - | - | Fixed Inductors | Compliant | :No SVHC (20-Jun-2013) | 85045020 | 0.00038 | Axial | - | :High Frequency / RF | :EPCOS - B78108S BC Series | :0.16ohm | Bobbin Core | 495-5547-1 | 11.5mm | Ferrite | 55 | :1.2A | - | :4mm x 9.2mm | :2 | 55@7.96MHz | - | :1MHz | :4mm | - | - | - | - | - | - | - | - | - | - | :0.63mm | Axial | - | - | - | - | 160mΩ | - | - | :25mm | 1 | - | - | - | - | - | - | - | - |
 Fixed Inductors 120uH 300mA 2.4ohms RF Choke Bobbin Core 120uH 5% 100KHz 70Q-Factor Ferrite 300mA 2.4Ohm DCR AXL T/R CHOKE RF 120UH 300MA AXIAL Epcos 120μH ±5% Ferrite Leaded Inductor, Max SRF:4.5MHz, Q:70, 300mA Idc, 2.4Ω Rdc INDUCTOR,B78108-S1124-J EPCOS | 5000 | 5000: ¥0.9683 | RoHS Compliant | 120 uH | 5 % | 200 mA | 2.4 Ohms | 9.2 mm | Reel | 4 mm Dia. x 9.2 mm L | Axial | 5000 | Ferrite | 0.796 MHz | Unshielded | B78108S1124J000 | 10,000 | 2.4 Ohm Max | 4 mm | Through Hole | 11.5 | RF Choke | - | - | 4.5 MHz | BC | - | Fixed Inductors | Compliant | - | - | - | Axial | - 55 C to + 125 C | - | - | - | Bobbin Core | B78108S1124J000 | 11.5mm | Ferrite | 70 | - | - | - | - | 70@796KHz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Axial | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 | 10 | 1: ¥16.252 | RoHS Compliant | 65 uH | - 30 %, + 50 % | 1.8 A | 200 mOhms | 13.5 mm | Tray | 21.5 mm W x 21.1 mm L x 13.5 mm H | Through Hole | 576 | Ferrite | - | - | B82731T2182A020 | 576 | 200 mOhm | - | Through Hole | - | - | Inductors | - | - | B82731T | 21.5 mm | Fixed Inductors | - | - | - | - | - | -40°C ~ 125°C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.8A | Power Line | 0.831" (21.10mm) | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Fixed Inductors 1.0uH 2.2A 0.08ohms RF Choke Bobbin Core 1uH 10% 1MHz 40Q-Factor Ferrite 2.2A 80mOhm DCR AXL T/R HF-CHOKE LBC 1UH 10% Epcos 1μH ±10% Ferrite Leaded Inductor, Max SRF:200MHz, Q:40, 2.2A Idc, 80mΩ Rdc INDUCTOR, 1UH, 10%, 2200MA, 200MHZ INDUCTOR,B82144-A2102-K EPCOS | 4209 | 1: ¥5.304 | RoHS Compliant | 1 uH | 10 % | 2200 mA | 0.08 Ohms | Axial | Bulk | 0.157" Dia x 0.362" L (5.20mm x 12.00mm) | Axial | 1500 | Ferrite | 100kHz | Unshielded | B82144A2102K000 | 1,500 | 80 mOhm Max | 5.2mm | Through Hole | 14.8 | RF Choke | - | :± 10% | 200 MHz | - | - | Fixed Inductors | Compliant | :No SVHC (20-Jun-2013) | 85045095 | 0.0011 | Axial | - 55 C to + 125 C | :High Frequency / RF | :EPCOS - B82144A LBC Series | :0.08ohm | Bobbin Core | 495-5611-1 | 14.8mm | Ferrite | 40 | :2.2A | - | :5.2mm x 12mm | :2 | 40@7.96MHz | :250V | :1MHz | :5.2mm | - | - | - | - | - | - | - | - | - | - | :0.63mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 10 | 1: ¥9.996 | RoHS Compliant | 33 uH | 10 % | 1.3 A | 0.13 Ohms | 8.3 mm x 7.5 mm x 5.5 mm | - | 7.5 mm W x 8.3 mm L x 5.5 mm H | SMD/SMT | - | - | - | Unshielded | - | - | - | - | - | - | - | SMD Power Inductors | :± 10% | - | B82473A1 | 7.5 mm | - | - | :No SVHC (20-Jun-2013) | 85045020 | 0.001 | - | - | :Wirewound | :EPCOS - B82473A1 Series | :0.13ohm | - | - | - | - | - | - | - | :8.3mm x 7.5mm x 5.5mm | :2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | :1.3A | :1.2A | - | - | - | - | - | - | - | - | - | - | - | - | - |
Fixed Inductors 2.2uH 1000mA .25ohms Ind RF Choke Bobbin Core 2.2uH 10% 1MHz 55Q-Factor Ferrite 1A AXL T/R CHOKE RF 2.2UH 1.0A AXIAL Epcos 2.2μH ±10% Ferrite Leaded Inductor, Max SRF:140MHz, Q:55, 1A Idc, 250mΩ Rdc INDUCTOR,B78108-S1222-K EPCOS | 8546 | 1: ¥2.992 | RoHS Compliant | 2.2 uH | 10 % | 1000 mA | 0.25 Ohms | Axial | Reel | 0.157" Dia x 0.362" L (4.00mm x 9.20mm) | Axial | 5000 | Ferrite | 7.96MHz | Unshielded | B78108S1222K000 | 5,000 | 250 mOhm Max | 4mm | Through Hole | 11.5 | RF Choke | - | - | 140 MHz | - | - | Fixed Inductors | Compliant | - | - | - | Axial | - | - | - | - | Bobbin Core | 495-5556-1 | 11.5mm | Ferrite | 55 | - | - | - | - | 55@7.96MHz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Axial | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
 Inductor Kits & Accessories Design Kit SIMID1210 Serie B82422*100 Kit KIT INDUCTOR 1210-A SERIES KIT, SMT INDUCTORS, SIMID 1210-100 INDUCTOR KIT, SMD 1210, 0.015UH to 100UH SAMPLEKITFORSMT-INDUCTOR1210-100 EPCOS | 11 | 1: ¥539.444 | RoHS Compliant | 0.01 uH to 100 uH | 5 %, 10 % | 450 mA | 11 Ohms | 3225 (1210 metric) | Bulk | - | SMD/SMT | 1 | Ceramic or Ferrite | 0.796 MHz to 100 MHz | Unshielded | B82422X0100 | 1 | - | - | Surface Mount | - | - | SMD Inductor Kits | 0.10 uH to 100 uH | 8 MHz to 4000 MHz | SIMID | - | - | - | :No SVHC (20-Jun-2013) | 85045020 | 0.13 | - | - | - | - | - | - | - | - | - | 15 to 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | :15 Each - 24 Values of 0.015µH to 100µH | 1210 (3225 Metric) | 360 pcs - 15 ea of 15nH ~ 100µH | Fixed | :SIMID 1210-100 Inductors | - | - | - |
 Fixed Inductors 1.5uH 370mA 10% 3.2x2.5mm SMD Ind General Purpose Chip Molded Wirewound 1.5uH 10% 7.96MHz 30Q-Factor Ferrite 370mA 1210 Blister T/R INDUCTOR, 1210H, 1.5UH, 0.37A, 10% EPCOS 屏蔽 铁氧体芯材 绕线贴片电感器, 1.5 μH ±10%, 370mA Idc Q:30 EPCOS | 5230 | 10: ¥2.49 | RoHS Compliant | 1.5 uH | 10 % | 370 mA | 0.7 Ohms | 1210 (3225 metric) | Reel | 2.5 mm W x 3.2 mm L x 2 mm H | SMD/SMT | - | Ferrite | 7.96 MHz | Molded | - | - | 0.7 ohm | Not Required mm | - | 3.5 mm | General Purpose Chip | - | :± 10% | 200 MHz | - | 2.5 mm | - | - | :No SVHC (20-Jun-2013) | 85045020 | 0.001 | - | - | :Wirewound | :EPCOS - B82422T Series | :0.7ohm | Wirewound | - | - | - | 30 | :370mA | 2.1 mm | - | - | 30 | - | - | - | No | Not Required | Not Required ohm | 370 mA | 2.8 mm | Not Required | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Fixed Inductors RING CORE CHOKE 2X1MH 2A Common Mode Chokes Dual 1mH 100kHz 2A 80mOhm DCR Thru-Hole Box COIL CHOKE 1.0MH 2A VERT RINGCORECHOKE2X1mH2A EPCOS | 10 | 1: ¥8.6632 | RoHS Compliant | 13 uH | 30 % | 2 A | 80 mOhms | 20.3 mm | Tray | 13.2 mm W x 18.2 mm L x 20.3 mm H | Radial | 720 | Ferrite | 0.1 MHz | - | B82721K2202N001 | 720 | 80 mOhm | Not Required mm | Through Hole | 18.2 mm | Power Line Chokes | Chokes | - | - | B82721K | 13.2 mm | - | Compliant | - | - | - | Pin | - 25 C to + 60 C | - | - | - | - | - | - | - | - | - | 20.3 mm | - | - | - | 250VAC | - | - | No | Not Required | Not Required ohm | 2000 mA | 13.2 mm | Not Required | 2A | Power Line | 0.823" (20.90mm) | 2 | - | - | - | - | - | - | - | 15 mm | - | - | - | - | - | - | - | - | 1.5kVAC | Compliant | Dual |
 | 470 | 1: ¥13.464 | RoHS Compliant | 680 uH | 20 % | 1.2 A | 1.2 Ohms | 7.11 mm | - | 15.24 mm W x 18.54 mm L x 7.11 mm H | SMD/SMT | - | - | - | - | - | - | - | - | - | - | - | SMD Power Inductors | - | - | - | 15.24 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |