Schneider Electric
所示图像仅为示意图。请从产品数据表中获得准确的规格。
| Type | Description |
|---|---|
| product weight | 0.81 kg |
| noise level | 50...51 dB |
| height | External: 268 mm |
| device composition | 1 outlet grille front1 axial motor2 protective grille on the front and rear surfaces1 filter front of axial motor1 cut-out template1 power cord |
| [In] rated current | 0.3 A 50 Hz |
| condition of use | Outside temperature must be 5 °C lower than inside temperatureFilter must be cleaned and replaced regularlySurrounding environment must be relatively cleanOverfrequent filter replacement should be avoidedFlow rates depends on the work point, see ProClima software |
| product or component type | Fan |
| bearing type | Ball |
| width | External: 248 mm |
| type of ventilation filter | Standard |
| ambient air temperature for storage | -40...70 °C |
| range of product | ClimaSys CV |
| ambient air temperature for operation | -10...70 °C |
| maximum pressure | 50 Pa flow rate 0 m ³/h |
| material | Injected thermoplastic (ASA PC) for outlet grille |
| IP degree of protection | IP54 |
| air flow | Free flow rate with standard filter: 190 m3/h at 50 Hz |
| cut-out dimensions | 223 x 223 mm |
| colour | Outlet grille: grey RAL 7035 |
| electrical connection | Faston connector |
| depth | External: 104 mm |
| input voltage | 24 V DC 50/60 Hz |
| [Us] rated supply voltage | 10...27.6 V |
| rated power in W | 8 W 50 Hz |
| RESOURCE TYPE | LINK |
|---|---|
| Datasheets |
|
咨询QQ
热线电话
